How To Pair JBL Earbuds To Your Device And Get Your Favorite Music Streamed

How to pair jbl earbuds

JBL has been a leader for a long time in the development of high-quality headphones and earbuds with superior sound. JBL headphones or earbuds are a wonderful choice for you whether you prefer streaming the latest shows, gaming, or listening to music at home or on the go. We’ll teach you how to pair JBL earbuds with your smartphone or PC in this article.

JBL Earbuds

JBL is most known for its affordable and cheerful Bluetooth speakers, but the firm also makes great headphones and earbuds. They’re known for their upbeat, lively music with a lot of bass and colorful graphics. We’ve compiled a list of the best models for you to peruse below.

1. JBL Live Pro+ TWS

Active noise cancellation, 11mm dynamic drivers, and a bass-forward sound are all features of the JBL Live Pro+ TWS earbuds. These earbuds offer a decent fit, are well-made, and are water-resistant to IPX4 standards. With 7 hours on the earbuds and another 21 hours on the charging case, you get a total of 28 hours of listening time. The earbuds have six microphones that work together for ANC and calls.

2. JBL Live 300TWS

The JBL Live 300TWS earbuds contain Ambient Aware and TalkThru technology and are compact in size. With Ambient Aware, you can go from absolute music immersion to attention to your surroundings, and with TalkThru, you can communicate with your pals without removing your headphones. The battery life of the JBL LIVE 300TWS earphones is up to 6 hours on a single charge. Put them in the charging case for a total of 14 hours of listening time (maximum). In just 10 minutes, you can get a one-hour boost.

3. JBL Tune 225TWS

The JBL Tune 225TWS earphone is ideal for sports and fitness. They’re light and comfortable to wear. While they only filter a little amount of ambient noise, they may be handy if you’re out and about and want to stay aware of your surroundings. Unfortunately, they don’t have built-in volume controls, so you’ll have to make this adjustment with your phone.

4. JBL Tune 115TWS

The JBL Tune 115TWS wireless earbuds have a unique design, are lightweight, have a powerful sound with booming bass, and allow you to use your favorite virtual assistant hands-free. The Tune 115 TWS wireless earbuds lack a sophisticated microphone setup and aren’t compatible with JBL’s mobile app, which is crucial to note. The buds’ maximum battery life of 6 hours isn’t very impressive, but it’s more than sufficient for the price. Their USB-C charging case has a capacity of more than two full charges.

5. JBL Tune 230NC and Tune 130NC

These new truly wireless earphones, according to JBL, outperform the JBL Tune 125 TWS and JBL Tune 225 TWS. The Tune 230NC retains the appealing form factor with upgraded silicone tips and offers greater bass performance, but the Tune 130NC adds Active Noise Cancellation to a more traditional earphone design.

Both earbuds have four microphones, Bluetooth 5.2 compatibility, Google Smart Ambient, Fast Pair, Dual Connect + Sync, Google Assistant, and Alexa access, and are sweat and water-resistant to IPX4 standards.

How To Pair JBL Earbuds with Your Smartphone or PC

Now that you know everything there is to know about JBL earphones and how amazing they are, it’s time to figure out how to connect them to your devices (Windows, Android, iPhone, and Mac).

1. Connect your JBL earbuds with an Android Phone

Follow these instructions to pair JBL earbuds (Live Pro+ TWS, JBL Live 300TWS, JBL Tune 225TWS, and JBL Tune 115TWS) with Android phones (Samsung, Xiaomi, and Google Pixel):

Step 1: Turn on your JBL earbuds and put them in pairing mode.

Step 2: On your Android phone, launch the “Settings” app.

How to pair JBL Earbuds

Step 3: Go to the “Bluetooth” section of the website.

How to pair JBL Earbuds

Navigate to Bluetooth.

Step 4: To connect your phone to your JBL headphones, turn on Bluetooth and pick them from the available devices list.

How to pair JBL Earbuds

Choose your earbuds.

That concludes our discussion. Your Beats earbuds have been successfully connected to your Android phone. Now, turn on your music and listen to it.

You may either switch off your JBL headphones or unpair them from your Android phone to unplug and unpair them from your phone. Go to Settings > Bluetooth and select the three-dot button to unpair your headphones from your phone. On the next page, select Unpair.

How to pair JBL Earbuds

Disconnect your JBL earbuds from your Android device.

Connect all of your gadgets to your Beats earbuds

2. Pair JBL earbuds with your iPhone

To connect your JBL (Live Pro+ TWS, JBL Live 300TWS, JBL Tune 225TWS, and JBL Tune 115TWS) earbuds to your iPhone, follow the steps below:

Step 1: Switch your JBL earphones to pairing mode.

Step 2: Open the “Settings” app on your iPhone after your earbuds have been set into pairing mode.

How to pair JBL Earbuds

Step 3: On the Settings page, tap Bluetooth.

How to pair JBL Earbuds

Step 4: Now activate the Bluetooth feature. The buds will appear in the list of devices if they are in pairing mode.

How to pair JBL Earbuds

Step 5: Simply choose your earbuds from the list of devices, and they will connect to your iPhone instantly.

your JBL earbuds are connected

How to pair JBL Earbuds

Simply go to Bluetooth, click on your headphones, and select “Unplug” or “Forget this device” to disconnect the JBL earbuds from your iPhone device.

Remove it from your iPhone.

3. Connect your JBL earbuds to a Windows PC

By following the steps below, you can pair your JBL (Live Pro+ TWS, JBL Live 300TWS, JBL Tune 225TWS, and JBL Tune 115TWS) earbuds with your Windows 11 or Windows 10 computer:

Step 1: Launch the Settings app by searching for it in the Start Menu or using “Windows key + I” on your keyboard or directly by clicking on Start Menu and choosing Settings.

How to pair JBL Earbuds

Look for Settings

Step 2: In the Windows Settings window, go to the right pane and click “Bluetooth & devices,” then switch on the Bluetooth toggle.

How to pair JBL Earbuds

Bluetooth should be enabled in Windows.

Step 3: Pair your JBL earbuds with your Bluetooth device when it has been turned on.

Step 4: Select “Add device” from the drop-down menu.

How to pair JBL Earbuds

Include a device.

Step 5: From the three options, choose “Bluetooth.”

How to pair JBL Earbuds

Step 6: Now you must wait for your Windows 11 PC to search for available devices before selecting your JBL earbuds from the list.

How to pair JBL Earbuds

Connect your JBL earbuds to your computer.

Go to the same Bluetooth menu, click the three-dot menu next to the JBL headphones, and pick Unplug to disconnect the JBL earbuds from your Windows 11/10 PC or Laptop.

4. Pair JBL earbuds with your MacBook and Mac (MacBook Pro, MacBook Air, & iMac)

Follow these steps to connect your JBL earbuds to your MacBook or Mac (Live Pro+ TWS, JBL Live 300TWS, JBL Tune 225TWS, and JBL Tune 115TWS):

Step 1: Make sure your JBL earbuds are turned on and in pairing mode first.

Step 2: Go to your Mac’s System Preferences.

How to pair JBL Earbuds

Preferences for the system

Step 3: From the drop-down menu, select “Bluetooth.”

How to pair JBL Earbuds

Step 4: To turn on Bluetooth on your Mac, click “Turn Bluetooth On” on the left side.

How to pair JBL Earbuds

Bluetooth should be enabled.

Step 5: On the right side of the Bluetooth window, under “Devices,” all nearby, discoverable devices will show. When you see your JBL earbuds, tap “Connect.”

How to pair JBL Earbuds

Connect your JBL earbuds to your computer.

That concludes our discussion. You’ve successfully linked your JBL earbuds to your Mac or MacBook. Now go out and enjoy your day!

Go to System Preferences > Bluetooth and hit the “x” or right-click and select “Detach” next to the entry for the earbuds to unpair or disconnect them from your Mac or MacBook.

Remove the JBL earbuds from your Mac.


Bluetooth has gotten increasingly adaptable over time, and with the ease of use that JBL headphones provide, taking advantage of it has never been easier! Once you’ve connected your earbuds to a device, they should stay in Bluetooth memory and you shouldn’t have to worry about it again.


Q. Why can’t I pair my JBL earbuds with my Bluetooth device?

A problem with pairing is the most typical cause of your JBL earphones not working. Disconnecting your headphones from your Bluetooth device and restarting your JBL earbuds should usually cure the problem. Cleaning the charging pins in the casing should cure the problem in other cases.

Q. Only one of my JBL earbuds is working.

If only one of your JBL earphones is working, check to see if both sides of the earbuds are charging. When the connections are not properly positioned within the shell, this problem usually occurs. If dirt or debris is preventing them from establishing appropriate contact, cleaning the charging space on both the earphones and the inside of the case is also recommended.

Q. How do I upgrade the firmware on my JBL earbuds?

Follow the instructions below to upgrade the firmware or device software on your JBL Earbuds:

JBL Headphones is a free app that you can download and use.

In the app, select the JBL earbuds.

If an update is available, an orange circle will display. It should be tapped.

Then press the Install button.

Wait until the message “Restart” appears. When you’re done, the information screen for your JBL earphones will appear.

Leave a Comment

Your email address will not be published.