How to Connect Speakers with Speaker Wire?

speaker wire

On the off chance that you are considering how to connect speaker wire in your sound system or home theater framework, at that point you’ve gone to the perfect spot. 

It’s not the most energizing piece of setting up your gear – yet without speaker wire, you will not hear anything! 

Before you start it might appear to be an interesting business. Yet, when you think about it, it is very clear. 

To start with, you need to comprehend the distinctive connection types that you may have on your stuff. 

At that point, you can consider the most ideal approach to connect the wire. 

Intensifier speaker connections: how to connect speaker wire included picture 

Speaker wire is made of two separate links that should be connected to the positive and negative connectors on the intensifier and speaker. 

It doesn’t make any difference what direction round you connect the wires – regardless of whether the wire is set apart with an or more and short. 

Simply ensure that a similar piece of wire is connecting the positive and adverse terminals on the intensifier and speaker. 

There are two posts for every speaker. They are plainly named as sure and negative. The convention is to shading the positive side red and the negative side dark. However, they may not generally be shading coded. 

One wire, similar to the one presented above, will connect to the positive and negative post for a solitary speaker yield. The opposite finish of the wire will connect to the speaker. 

Keep in mind, the positive connection on the intensifier should be connected to the positive connection on the speaker. The equivalent with the negative connections. 

What Happens in the event that If You Reverse Speaker Wire Connectors? 

In the first place, it relies upon what you mean by invert. There two or three different ways you may do this. 

1. Connect Stereo Speakers to the Wrong Channels 

On the off chance that you connect the left speaker to the terminals stamped directly on the enhancer – and the correct speaker to the terminals checked left on the intensifier. 

What might occur? 

Nothing. But, the sound architect who blended the collection would be irritated. 

Since the drum pack would be the ‘incorrect route round’. Anything which was intended to be heard on the left would show up on the right – and the other way around. 

No one would mind separated from the craftsman who went through a half year getting everything spot on. 

2. Connect the Negative to the Positive Terminals 

In the event that, for a solitary speaker channel, you connect the enhancer’s adverse terminal to the positive connection on the speaker – and the intensifier’s positive terminal to the negative connection on the speaker. What might occur? 

For a solitary speaker, nothing would occur. It would turn out great. 

On the off chance that you had two speakers, and they were both wired something very similar – once more, it would be fine. 

On the off chance that there were two speakers, and they were wired in an unexpected way, this is the thing that is known as wiring the speakers out of stage. 

The stomach in one speaker would move out, while in the other speaker it would be moving inwards. 

It’s difficult to clarify what this seems like. Be that as it may, it simply sounds odd. It will show up slim and ailing in body. 

What’s going on is that a portion of the lower frequencies will offset each other as the sound waves move away from the speaker. 

Along these lines, you will not break anything, yet it just will not sound right. You’ll probably see it in the event that you’ve done it. However, it’s in every case great to twofold check your wiring. 

Some AV collectors will attempt to identify any speakers that are wired out of stage when you run the programmed room arrangement. Despite the fact that, they don’t generally take care of business. 

What are the Different Speaker Wire Connector Types?

The main thing you need to do is take a gander at the connections on your speakers and intensifier. This will decide how you can connect the speaker wire. 

There are two principle kinds of connections that you will experience. 

Simply know that you may have one sort on the intensifier and an alternate one on the speaker. 

1. Restricting Posts 

Restricting posts are found on a wide range of intensifiers and speakers – from spending models to very good quality gear. They are the most well-known sort that you will go over. 

There are frequently two different ways of connecting the speaker wire to these: 

  • Unscrew the red or dark cap – embed the exposed speaker wire into the opening in the post (or addition a spade connector around the post) – fix the cap once more 
  • Addition the wire into the opening toward the finish of each post. For this, you should connect banana plugs (see underneath). A few collectors will have a plastic cap over the end which should be taken out first (as in the image). 

Along these lines, for this kind of connection, you can utilize uncovered wire – or connect spades or banana fittings to the furthest limit of the speaker wire. 

Speakers that have restricting posts probably won’t have an opening toward the finish to embed a banana plug. Some do, however it’s more normal on enhancers. 

In this way, with his connection, you can either embed exposed wire into the opening – and afterward fix the screw. 

Or on the other hand, utilize a spade connection and spot it around the post prior to fixing it up. 

2. Spring Clips 

Spring cuts are more normal on spending enhancers and speakers – and across the board frameworks. Despite the fact that they can be found in a wide range of hardware. 

You should simply push the base piece of the clasp and push the speaker wire into the opening above. 

You can utilize uncovered wire or pin connectors with this kind of connection. 

Speaker Wire Termination Types 

Since you understand what sort of connections you have for your speaker wire; you can settle on the last decision on the most proficient method to end the finishes. 

Appending a connector to the furthest limit of a length of speaker wire is known as ending the wire. 

Be that as it may, the primary alternative doesn’t need any connector whatsoever. 

Connecting Speakers with Bare Wire 

All connection types will acknowledge uncovered speaker wire. This is the most effortless strategy as you needn’t bother with any additional frill. 

All you need to do is: 

  • Pull the positive and negative wires separated – by around 1 or 2-inches – so you have some partition to work with. You may require a sharp blade to part the focal protection – or it will simply pull separated in the event that you apply sufficient pressing factor. Simply ensure you don’t cut into the protection and uncover exposed wire further down the link. You simply need uncovered wire toward the end. 
  • Eliminate about ½ inch of protection from each wire. This should be possible with a sharp blade or a devoted wire stripper. 
  • Turn the uncovered wire together so that there are no free strands of copper 
  • Addition the copper wire into the speaker/intensifier connectors – once more, ensuring there are no free strands of copper standing out 
  • Tenderly force the wire to ensure it is immovably held by the connector 

On the off chance that utilizing exposed wire is the most effortless path for you to accomplish your objective, at that point go with it. I wouldn’t lose any rest over this. Notwithstanding, joining connectors can enjoy benefits. 

Ending Speaker Wire with Banana Plugs 

Banana plugs are my number one method of connecting speaker wire. You should purchase these as a different assistant to your wire. 

You will require four banana plugs for every wire – two for each finish of the link. 

Obviously, that is expecting that you will utilize banana plugs for both the intensifier and speaker. You probably won’t have any desire to – or have the option to. 

Banana fittings may append to the link in an unexpected way. 

Many accompany screw-in connections that simply should be gotten to the link with a little screwdriver. This is perhaps the simplest strategy. 

Some are self-creasing which simply implies that they will cinch the link when you fix the cap of the attachment. 

Others may require binding. So possibly pick this sort on the off chance that you are set up to break out a welding iron. 

The overall procedure for connecting screw clasp banana fittings to speaker wire is: 

  • Strip about ½-inch of protection from the finish of each wire and contort it tight to eliminate free strands 
  • Unscrew the cap from every banana attachment and string it onto the wire 
  • Drive the uncovered wire into the opening in the attachment and fix the screw to get it 
  • Screw the cap back on 

Each fitting would then be able to be embedded into the finish of each limiting post. 

You may discover some banana plugs that connect to the wire in a marginally extraordinary manner to this. However, the overall thought is something similar. 

You will not see the value in how much simpler banana plugs are to work with until you are slithering around the rear of a speaker attempting to append the exposed wire to a limiting post. 

A few group like to weld the wire to the attachment to make a more hearty connection – regardless of whether it is a screw-in model. You can in the event that you wish, yet you don’t need to. 

Banana connects that accompany screw connections function admirably without binding as long as you are cautious when you consolidate it. 

Notwithstanding, quite possibly they may relax over the long run, so you may have to check the connection on the off chance that you reconnect them routinely.

Numerous banana fittings will have a female connection on the base end – like the ones presented previously. This permits you to plug another banana plug into it. 

This is helpful in the event that you need to connect numerous speakers to a similar terminal. You will not frequently need to do this, yet now and then it tends to be useful. 

For instance, on the off chance that you need to take care of an undeniable level subwoofer contribution from the front left and right speaker terminals. 

Banana plugs pins are a standard 4mm in distance across which is perfect to find a way into the finish of a limiting post. 

Utilizing Spade Connectors with Speaker Wire 

Spades are an elective method to end your speaker wire. 

Similarly as with banana plugs, on the off chance that you are utilizing spades at the two closures, you will require four spade connectors for each wire. 

The spade connector can either be calculated or straight. It shouldn’t make any difference a lot of which one you purchase. However, in certain conditions, one might be simpler to fit than the other. 

They for the most part connect to the speaker wire by creasing, patching or by a screw connection like with banana plugs. 

Pleating is the place where you utilize an apparatus to twist the connector’s end so it catches firmly to the wire. It very well may be a decent arrangement on the off chance that you would prefer not to engage in binding the wire. 

It’s in every case best to utilize a proper pleating device to make the join. In spite of the fact that it’s enticing just to get a couple of pincers, you will not get a similar tight connection. 

Done properly, a spade creased connection shouldn’t require fastening. 

When you have the spades appended to the wire, you need to unscrew each limiting post and drive them into place. They will be secure once you fix the cap once more. 

This is desirable over utilizing exposed wire as you can make certain of a tight and solid connection. 

Spade connectors can be ideal when you are appending a wire to speakers that are introduced exceptionally near a divider. Around there, you might not have sufficient space to utilize banana plugs. 

Along these lines, in the event that you would prefer not to utilize exposed wire, spade connectors will connect at a 45 or 90-degree point permitting the wire to drop straight down. 

Ending Speaker Wire with Pin Connectors 

Pin connectors resemble a more modest variant of a banana plug. Indeed, now and again, you may see them alluded to as banana plugs. 

They accompany pins that are for the most part about 2mm in measurement. The pin is either straight or you can get them with calculated pins. 

Like spades and banana plugs, you need to take some protection from the wire and connect the pins to the exposed wire. 

Creasing or patching is regularly used to connect these to the wire. Notwithstanding, similar to the pin connectors in the image above, they may likewise have a screw-in connection. 

Simply fix the screw a bit, embed the exposed wire, and afterward fix the screw once more. Ensure you have a firm connection by tenderly pulling the speaker wire. 

This sort of speaker wire end is for the most part utilized for spring cut connections. Basically push down the clasp and addition the pin into the opening. 

You could likewise utilize them with restricting posts by embeddings them through the focal opening in the post – and afterward fixing the cap. In any case, it’s not the standard method of utilizing this kind of connector. 

Utilizing pin connectors is a cleaner strategy than utilizing uncovered wire and expands the odds of a strong connection. 

Connecting the Wires to Your Amplifier and Speakers 

When you have your speaker link terminations prepared, you simply need to connect the wires to your intensifier and speakers. 

Simply ensure that you connect the enhancer yield stamped speaker left to one side speaker – and the yield checked speaker right to the correct speaker. 

Likewise, a similar finish of the wire should connect to the positive terminal at the enhancer and speaker. The equivalent with the adverse terminals. 

Speaker wire is generally set apart somehow or another so you realize which is a similar wire at each end. 

A multichannel AV recipient is somewhat more convoluted as it has more speaker terminals. Nonetheless, the concept for home performance center wiring is equivalent to with a sound system speaker. 

You simply need to ensure that you connect each yield terminal to the right speaker. 


  • Front left yield terminal to the front left speaker 
  • Front right yield terminal to the front right speaker 
  • Focus speaker yield terminal to the middle speaker 
  • Encompass left yield terminal to the encompass left speaker 
  • Encompass right yield terminal to the encompass right speaker 

In the event that you have a 7.1 speaker format or are utilizing Dolby Atmos speakers, you will have significantly more speakers to connect. 

However, it’s a similar procedure. Simply take as much time as is needed and ensure you take care of business the first run through. 

At the point when you run the auto room configuration on your AV beneficiary, it will convey a test message to every speaker. Along these lines, you will before long see whether you connected the right speakers to the back of the intensifier. 

If not, no problem, simply unplug it at the speaker and attempt once more.


This concludes everything you need to know about the speaker wire connectors. We hope now you have a much better understanding about not only speaker cables but also speaker wire gauge and everything related to this. Now you should not face any difficulties in connecting different wire connector types to your speaker or amplifier.

Leave a Comment

Your email address will not be published.